Wishbone Bush – T3 / Upper / Alternative

All T3 models '80 - '92

Ask a question about this product

Please fill in the information along with your question below and we will get back to you as soon as possible.

Product Question

  • This field is for validation purposes and should be left unchanged.

Details

Aftermarket alternative to the Lemforder bushes we try to keep in stock.

Please note to change these bushes on a 2WD you will need access to grinding and welding equipment and the wheel alignment will also need to be checked afterwards.

Syncro models omit the welding bit and are a press fit.

2 required per wishbone, 4 per vehicle. PRICED SEPARATELY BUT ONLY SOLD IN PAIRS

Syncro owners please note.

The only bushes we have returned are these, and when they are returned they always come from syncro owners.

Please be aware that VW stipulate that there must be no, or very little lateral movement between the bush and the eccentric washer [.5mm to be exact].

VW sold different thickness of eccentric washer to take up the “play” between the bush and the washer.

With 2WD vans the arms are pressed metal and the arm will conform when the securing bolt is tightened, on a Syncro however, the arm is forged and it doesn’t bend easily.

Having a too larger gap between the bush and the washer will result in the bush being destroyed through use.

We will no longer accept warranty returns for damaged bushes from syncro owners who have not set the bush to washer gap correctly.

We can tell by looking at the bush if this has happened.

Additional Information

Our Part No.

T3407077-ALT

Manufacturer

Febi

VW No

251 407 077

£11.76 (Inc VAT)
In stock

12 in stock

Returns: 28 Days