Upper Wishbone Bush – T3 / Powerflex
Vehicle Set
Please fill in the information along with your question below and we will get back to you as soon as possible.
Product Question
Details
NOW WITH FREE SHIPPING
We now supply these as Black “Heritage” line from Powerflex, they are the same material as the older style, just in black.
We only sell these bushes in vehicle sets.
That is a set of 4 bushes, 2 per side.
We cannot see the point in uprating pair, or even a single bush.
2 bushes per wishbone, 4 per vehicle
If you need to replace one bush, then contact us and we can supply separately. This should only be done to replace another polyurethane bush, its not advisable to mix the bushes on a vehicle.
Please note to change these bushes on a 2WD you will need access to grinding and welding equipment and the wheel alignment will also need to be checked afterwards.
Syncro models omit the welding bit and are a press fit.
Syncro owners please note.
The only bushes we have returned are these, and when they are returned they always come from syncro owners.
Please be aware that VW stipulate that there must be no, or very little lateral movement between the bush and the eccentric washer [.5mm to be exact].
VW sold different thickness of eccentric washer to take up the “play” between the bush and the washer.
With 2WD vans the arms are pressed metal and the arm will conform when the securing bolt is tightened, on a Syncro however, the arm is forged and it doesn’t bend easily. Having a too larger gap between the bush and the washer will result in the bush being destroyed through use.
We will no longer accept warranty returns for damaged bushes from syncro owners who have not set the bush to washer gap correctly.
We can tell by looking at the bush if this has happened.
Additional Information
Our Part No.
PFF85-1006H
Manufacturer
Powerflex
VW No
251 407 077
12 in stock