Pair of Ball Joint spacers complete with fixing hardware.
BALL JOINTS NOT INCLUDED!
Ball joint spacers advised for raised T3 syncro models.
These are the more complex to manufacture German angled version not the cheaper straight aluminium versions, they are angled to reduce the operating angle of the ball joint, made from steel and hard coated.
Please be aware that due to the spacer being angled then this means you'll need to remove the threads from your ball joints to allow fitting (basically drilling the threads out of the ball joint) the ball joint bolts then pass up through the ball joint into the spacer.
Also supplied with a strengthening plate for the top of the arm to clamp the spacer in to place for a more secure connection to the arm due to increased leverage, belt and braces!
Works in 3 ways.
1. It will space the upper arm away from the spring on raised syncros.
2. It will reduce the angle the ball joint operates at.
3. It put's the upper arm into a higher position to allow you to get some camber adjustment back.
They will not fit 2WD T3, sorry.