Oil Cooler Kit – T3 / Diesel / 25 Row / 15mm
Priced and sold individually.
Please fill in the information along with your question below and we will get back to you as soon as possible.
Product Question
Details
Oil cooler kit with 15mm feed and return hoses to suit all T3 Diesel and turbo Diesel engines.
The kit is complete, everything you need to install an oil cooler on a T3 Diesel including a shorter oil filter.
Setrab oil cooler.
Dedicated stainless steel cooler mounting brackets.
Stainless steel hardware.
15mm front to rear feed and return lines with swaged fittings, no self assembly required.
Mocal High Flow thermostatic take off plate.
New oil cooler.
Short oil filter.
Please note that this is our more expensive kit that uses larger bore hoses. Smaller bore hoses can increase oil pressure drop.
This kit uses the larger ID hoses than most of the other suppliers use and we are often asked why our kit is so expensive compared to others, the simple fact is that we used the next size hose up in an attempt to ally oil pressure drop.
The 90³ oil cooler hose fittings are for the oil cooler end, the straight ends for the sandwich plate end. Abrasion protection is fitted to the hoses for areas where abrasion may occur.
We suggest the lines are run to the right hand front chassis member and secured. 2WD models, over the top of the fuel tank and then cable tied neatly together with the front to rear coolant pipes and heater hoses.
Additional Information
Our Part No.
T3-OC006
Manufacturer
T3 Tuning
This kit consists of the following individual parts:
PLEASE NOTE: If any of the items in the kit have a QTY of 0 they are unfortunately out of stock and will not be delivered if ordered.
