Oil Cooler Kit - T3 / Diesel / 25 Row / 12mm

Priced and sold individually.

Ask a question about this product

Please fill in the information along with your question below and we will get back to you as soon as possible.

* Required Fields



Oil cooler kit with 12mm feed and return hoses to suit all T3 Diesel and turbo Diesel engines.

The kit is complete, everything you need to install an oil cooler on a T3 Diesel including a shorter oil filter.

Setrab 25 row oil cooler.
Dedicated stainless steel cooler mounting brackets.
Stainless steel hardware.
12mm front to rear feed and return lines with swaged fittings, no self assembly required.
Mocal thermostatic take off plate.
New oil cooler.
Short oil filter.

Please note that this is our less expensive kit that uses smaller bore hoses. Smaller bore hoses can increase oil pressure drop so we advise that it is only used on good engines, engines that are marginal on oil pressure need not apply as it may cause more problems that it solves!

This kit uses the same size hoses that most of the other suppliers use and we are often asked why our kit was so expensive compared to others, the simple fact is that we used the next size hose up in an attempt to ally oil pressure drop however we have decided to make a smaller bore kit so we can give customers a comparison like for like.
This is what you see here, a less expensive kit for engines with good oil pressure.

The 90³ oil cooler hose fittings are for the oil cooler end, the straight ends for the sandwich plate end. Abrasion protection is fitted to the hoses for areas where abrasion may occur.
We suggest the lines are run to the right hand front chassis member and secured. 2WD models, over the top of the fuel tank and then cable tied neatly together with the front to rear coolant pipes and heater hoses. We suugest that the oil cooler lines are not fitted to the bottom of the bunch but to the side instead away from harms way, you don't want your engine oil being pumped back and forth in such a vulnerable position.

Additional Information

Additional Information

Our Part Number T3-OC001
VW Part No No
Manufacturer T3 Tuning


This kit consists of the following individual parts:

PLEASE NOTE: If any of the items in the kit have a QTY of 0 they are unfortunately out of stock and will not be delivered if ordered.

Product Name Price Qty
Oil Cooler - Setrab / Proline / 25 Row / M22 Female
£144.00 (Inc VAT)
Oil Cooler Hose - T3 / D/TD / 12mm / Return
£59.32 (Inc VAT)
Oil Cooler Hose - T3 / D/TD / 12mm / Feed
£61.38 (Inc VAT)
Thermostatic Oil Cooler Take Off - M18x1.5 Ports / 3/4" UNF
£67.86 (Inc VAT)
Oil Filter - T4 / 1.9TD "ABL" '96>
£11.95 (Inc VAT)
Cable Ties - Black / 398mm x 4.8mm / 100 pack
£3.84 (Inc VAT)
Oil Cooler Mounting Bracket Set - T3 / 25 Row
£28.80 (Inc VAT)
Oil Cooler Mounting Hardware Kit - T3 / 25 Row
£16.80 (Inc VAT)
In stock



Customer Reviews 0 item(s)

Be the first to review this product

You may also be interested in the following product(s)