CV Joint Kit – T3 / Rear
Also fits T3 Syncro front inner
Please fill in the information along with your question below and we will get back to you as soon as possible.
Product Question
Details
Kit contains
- CV Joint.
- CV Boot.
- 6 bolts.
- Grease.
- Clips.
Made by the OEM for VW.
Fits all 2 wheel drive models, same part for inner and outer end.
Also fits the following.
- 14″ syncro, rear inner and outer.
- 14″ syncro, front inner.
- 16″ syncro, front inner.
Please note when using on the front of a Syncro model the 47mm bolts supplied will be shorter than standard.
So you’ll need to order the kit in the related items (kit covers 2 joints as standard but you can reduce the quantity in the kit if only changing one joint).
Note regarding fitment.
You’ll notice the centre of the joint has one flat side and one with a slight chamfer… the chamfer is to assist with starting the joint on the splines of the shaft.
The joints should be fitted with the 3 rings around the edge facing away from the shaft. .
Additional Information
Our Part No.
22407/302255
Manufacturer
GKN/Löbro
VW No
251 598 101
70 in stock