Distributor Repair Kit – T3 / With Vac Advance
Please fully read the product description.
Please fill in the information along with your question below and we will get back to you as soon as possible.
Product Question
Details
Our own hall sensor kit to repair Bosch distributors fitted to VW T3 models, including Aircooled CU engines.
We have not found a T3 distributor with vac advance this kit doesn’t fit.
There is a Bosch kit for the “MV” engines still available, but for all others… its this or nothing.
This is a non returnable item, it is in a plastic bag, if the bag is open, you’ve bought it, simple as!
Basically, I’ve worked in garages all my life, I know what goes on, this isn’t something you buy to try out then send it back saying it doesn’t work or it’s the wrong one, it is the right one and they do work!
If it doesn’t work your problem lies elsewhere!
Please make sure that if you buy this item that it will fix your problems!
PLEASE READ THE DESCRIPTION THOROUGHLY, THIS IS NOT A STRAIGHTFORWARD REPLACEMENT!
A short time ago Bosch stopped production of the correct hall sensor kit for the T3, nobody else in the aftermarket makes a suitable kit and for this reason we’ve had to source different components to make the kit work… read on.
The hall sensor itself is the same as the original, the only difference is the plug in connection, the wiring plug is different to the one most likely fitted so you’ll need to change that for the one in the kit (unless its been changed previously)
Most manufacturers have now standardised their production and the section that clips into the distributor body may be too wide for the slot in the distributor.
So, to fit you need to open that gap up by a few mm. Not ideal, but this is all there is… it’s this or nothing!
So, along with the Hall Sensor, you’ll get a plug, a rubber boot and the correct wiring terminals you fit your plug.
You need to snip the existing plug off – taking note of the wiring positions, crimp the supplied connections on, and push the wiring into the plug.
Simple… ish.
You will also need to lubricate between the two plates. Only a drop of oil will be required, but worth mentioning.
So, there it is, Its not rocket surgery, but its not a straightforward swap either, if you are in any doubt about these instructions thenplease contact us before you buy. If you aren’t confident in your abilities… please don’t buy!
Additional Information
Our Part No.
T3998065
Manufacturer
Brickwerks Kit
VW No
035 998 065
This kit consists of the following individual parts:
PLEASE NOTE: If any of the items in the kit have a QTY of 0 they are unfortunately out of stock and will not be delivered if ordered.
