Mefro Steel wheels to fit all T3 models - 2WD and Syncro.
You'll need to remove the rear drum retaining bolts to fit - pretty standard for most non standard wheels.
6" wide and to suit 15" tyres.
Please note, that whilst these are a common fitment to T3 models, both 2WD and Syncro, they are actually manufactured for less glamourous uses such as trailers and horse boxes. The company that supplies them deals with everything from 10" trailer wheels to Diamond encrusted 24" rims... Steel wheels are at the bottom of the range as far as they're concerned!
So, they come painted but the paint isn't the thickest we've seen. Certainly not a patch on the coating on factory steels.
If you want perfection then stripping/blasting and powder coating would be preferable to painting over the existing coating with an aerosol.
Once they're yours you can do what you like with them :)
This situation is the same for ALL Mefro steel wheels.
These wheels require a special wheel nut to suit a T3, with the correct taper. The standard nuts/bolts used on the T3 and other VW/Audi models are not correct for Mefro wheels regardless of what you may have "read on the internet".
We have the correct nuts in a kit in the related items below. There are variations of Mefro wheels out there currently, so if you've sourced the wheels elsewhere and you're not sure of the type of nuts required let us know the numbers from the centre of the wheels and we can advise.