A set of hoses, clamps and T-Piece to replace the hoses above the fuel tank on a T3 Syncro Pick Up or Double Cab Pick Up.
Contains hose from breather valves to the T-piece, a steel t-piece and the larger bore hose from the top of the tank to the filler neck.
Hose is FPM so suitable for whatever you throw at it, petrol, Diesel and suitable for E100 and B100.
Hose clips are stainless steel.
Please be aware that with modern fuels the older yarn overbraid hose specced from the factory is no longer compatible, the hose in this kit is overkill! removing the fuel tank on a syncro is not a 2 minute job and as such it's a job you want to do once and never again! Reason for the ramble, the outside diameter of the hose used is larger of that of the yarn overbraid hose and as such is tight through the holes in the body where the grommets are fitted from the factory, the grommets may no longer fit and provision is to be made.
Hose is supplied in one length and is to be cut to the following lengths.
Right hand valve - 1750mm
Left hand valve - 865mm
Filler neck - 520mm