Fuel Line Kit – T3 / 2WD / WBX / Injection / Engine Bay
Engine Bay Kit for 1.9i and 2.1i
Please fill in the information along with your question below and we will get back to you as soon as possible.
Product Question
Details
Fuel line kit to replace the fuel hose in the engine bay on fuel injected 2 wheel drive T3 models.
Replaces the feed into the engine bay, and all hoses to the fuel rails and back to the fuel pressure regulator.
This kit doesn’t replace the short sections from the fuel rail to the injectors.
As with all our fuel line kits the hose in this kit is suitable for up to 100% Ethanol so will not degrade with modern pump fuel.
Kit contains enough fuel hose and outer protective sleeve to replace all hose and all clips.
Cut lengths as follows
| Fuel Hose | Sleeve | |||
| Hose | From | To | Length mm | Length |
| Feed | Bulkhead | T-Piece | 480 | 430 |
| Return | Regulator | Brass Joiner | 400 | 350 |
| Cylinder 1 | Right Hand Fuel Rail | Fuel Pressure Regulator | 560 | 510 |
| Cylinder 2 | T-Piece | Right Hand Fuel Rail | 450 | 400 |
| Cylinder 3 | L/H Fuel Rail | Fuel Pressure Regulator | 430 | 380 |
| Cylinder 4 | T-Piece | L/H Fuel Rail | 500 | 450 |
Additional Information
Our Part No.
K00028
Manufacturer
Brickwerks Kit
Location
Webshop Kit
This kit consists of the following individual parts:
PLEASE NOTE: If any of the items in the kit have a QTY of 0 they are unfortunately out of stock and will not be delivered if ordered.
