14 mm Fuel Hose.
Stocked as T3 Syncro pick up fuel filler breather hose. - 420mm required.
Also suits Iltis fuel tank breather.
Suitable for BioDiesel
This is expensive hose, and usually only required in short lengths for the fuel tank breathers.
For this reason you can order smaller amounts than 1m.
Check the spec of any hose designated "R9" as much of this is safe with "up to" 10% Ethanol (E10)... the actual "R9" spec sheet states "Exposure of this hose to gasoline or diesel fuel that contains high levels, greater than 5% by volume, of oxygenates, i.e., ethanol, methanol, or MTBE may result in significantly higher permeation rates..." This hose is fine with 100% Ethanol.
There is already discussion about 15% Ethanol in Petrol (E15) and 10% Ethanol (E10) is on the wyay....
This hose is basically E100 safe.
All our Hose is GERMAN made (not just packaged in Germany to allow the word "Germany" on the packaging!) and sourced direct from the manufacturer so we are certain of the quality.
Rapeseed Methy Ester 0-100%
Hydro Tested Veg Oil 0-100%
Fatty Acid Methyl Ester 0-100%
Soya Methy Ester 0-100%
Working Pressure max 10bar
Test Pressure 20bar
Burst Pressure >50bar
Working Temperature - 40°C - 125°C
Short term up to 150°C
VW TL 524 24
GME 08 007
BMW GS 93010
This hose is supplied to us in 20m rolls.
The maximum length available in one piece is 20m.
We will always try to supply hoses in one complete length.
Please note that only complete rolls can be returned, pieces cut from the roll cannot be returned for credit, Please ensure that you select the correct hose and length.