Carburettor Rebuild Kit – T3 / 1.9l “DG” | Pierburg 2E3
For Pierburg 2E carburettor With 19mm Accelerator Pump Jet Diaphragm pushrod
Please fill in the information along with your question below and we will get back to you as soon as possible.
Product Question
Details
A set of seals for the 2E3 carb fitted to the T3.
Contains.
- Large gasket between carb body and top.
- New accelerator pump diaphragm
- New enrichment diaphragm
- New float needle
- Various other o rings etc.
Please be aware that there are 2 different types of 2E3 for the T3, one has a long accererator pump diaphragm and one has a short version.
The short version was fitted to earlier vehicles and was only used for a couple of years before VW replaced it with the long version.
Vw then discontinued supplying the short diaphragm and sold a repair kit with a diaphragm and new housing to convert short to long.
This kit is suitable for the more common long version, if you have the short version please add the extra correct diaphragm to your basket as found in the related items below.
This is the 19mm unit
Please see pictures below to identify which model you have.
 |
||
| 13mm pump jet diaphragm push rod, note short body. | ||
 |
||
| 19mm pump jet diaphragm push rod, note long body |
Additional Information
Our Part No.
T3DG129-19MM
Manufacturer
Aftermarket
VW No
027 129 281
87 in stock
