A set of lowering blocks to fit Mk1 VW Caddy rear.
Longer U Bolts
3 drops available, these will lower by approximately 2.0"
Please note. There are no off the shelf lowering blocks available to perfectly fit the rear axle of a Mk1 Caddy.
This is not a Caddy specific kit and will require slight modifications to fit.
These were originally designed for use on various Ford models which have a slightly smaller diameter axle.
This means that the U Bolts are slightly smaller than the caddy axle.
The usual method of fitting them is to push them onto the axle and then squeeze the ends of the U-Bolt in slightly (if necessary) to pass through the block.
If you're looking for an off the shelf set of lowering blocks for a Mk1 Caddy, this is as close as it gets I'm afraid.
Also note that to use Lowering blocks to LOWER your Caddy you will need to have the axle mounted ABOVE the leaf springs (Axle Flip).