We already sell complete HT lead sets( Early or Late ).
The early kits are not available off the shelf in a quality we’d be happy selling, so we make them up in house.
This means that we also have all the components to make HT leads, so theyre now available seperately.
Handy if you want to repair an existing lead rather than buy a complete set, and useful things to put in your “spares box” if you’re travelling.
There are 2 types of connectors used on T3 models… early (DIN) style and later (Pin) style. Its easy to tell which you need, just pull the plug from the coil or distributor cap and if theres a “pin” sticking up in the middle of the hole on the coil/cap you need the “Pin” type… if its just a hole you need “DIN”.
Spark plug connectors are simpler… ours will fit any plugs used, you may have to unscrew the cap from the plug though…
There is also top quality Silicon HT cable sold by the metre.
The DIN type connectors have a threaded fitting which you just push/twist the end of the cable onto. The Pin type require a crimped connector on the end of the cable. Theres is a special tool for this, but it can be done with pliers with a little care.
Webshop Links:
Spark Plug Connector
Distributor Cap Connector – PIN type
Distributor Cap Connector – DIN type
Coil Connector – PIN type
Coil Connector – DIN type
7mm Silicone Cable